THE EMC D-SNC-DY-00 WEB-BASED PRACTICE EXAM

The EMC D-SNC-DY-00 Web-Based Practice Exam

The EMC D-SNC-DY-00 Web-Based Practice Exam

Blog Article

Tags: Valid D-SNC-DY-00 Test Questions, Latest D-SNC-DY-00 Test Notes, D-SNC-DY-00 Test Objectives Pdf, D-SNC-DY-00 New Guide Files, Practice D-SNC-DY-00 Mock

The countless candidates have already passed their D-SNC-DY-00 certification exam and they all used the real, valid, and updated BraindumpQuiz D-SNC-DY-00 exam questions. So, why not, take a decision right now and ace your D-SNC-DY-00 Exam Preparation with top-notch D-SNC-DY-00 exam questions?

EMC D-SNC-DY-00 Exam Syllabus Topics:

TopicDetails
Topic 1
  • VXLAN: This topic focuses on your ability to manage VXLAN operations, including configuring and verifying BGP EVPN with both Asymmetric and Symmetric IRB. Understanding VXLAN is essential for enabling scalable and efficient cloud networks, making this topic critical to your D-SNC-DY-00 exam success.
Topic 2
  • SONiC Installation: Your proficiency in SONiC installation, upgrade, and downgrade methods will be tested in this Dell EMC D-SNC-DY-00 exam topic. You will need to install SONiC using both the ONIE manual and automatic methods. This topic measures your hands-on skills in managing SONiC installations efficiently.
Topic 3
  • QoS: Your understanding of Quality of Service (QoS) is essential to become a certified Dell cloud engineer. The exam evaluates your ability to configure and verify QoS features. This section tests your ability to ensure optimal network performance, a vital skill in managing cloud environments where service quality is paramount.
Topic 4
  • SONiC Configuration: This comprehensive topic evaluates your ability to administer and configure critical network components. You will need to manage port groups, configure management access, handle VLANs, and verify advanced features like Link Aggregation Groups and MC-LAG. Proficiency in these Dell EMC D-SNC-DY-00 Exam areas is crucial for ensuring robust and scalable network operations.
Topic 5
  • SONiC Bundles: In this topic, your understanding of Enterprise SONiC bundles will be assessed. As a cloud engineer, you must be able to compare different SONiC bundles, demonstrating your expertise in selecting the appropriate bundle for various cloud environments. Mastery of this will ensure you can optimize network configurations effectively.

>> Valid D-SNC-DY-00 Test Questions <<

Latest D-SNC-DY-00 Test Notes | D-SNC-DY-00 Test Objectives Pdf

As we all know, certificates are an essential part of one’s resume, which can make your resume more prominent than others, making it easier for you to get the job you want. For example, the social acceptance of D-SNC-DY-00 certification now is higher and higher. If you also want to get this certificate to increase your job opportunities, please take a few minutes to see our D-SNC-DY-00 Study Materials. Carefully written and constantly updated content can make you keep up with the changing direction of the exam, without aimlessly learning and wasting energy.

EMC Dell SONiC Deploy Exam Sample Questions (Q43-Q48):

NEW QUESTION # 43
A deployment requires routing and dynamic access control lists. What bundle must be used for this deployment?

  • A. Enterprise Standard
  • B. Edge Standard
  • C. Cloud Premium
  • D. Enterprise Standard

Answer: A

Explanation:
For a deployment that requires routing and dynamic access control lists, the appropriate bundle to use is the Enterprise Standard bundle. This bundle includes advanced routing capabilities and supports dynamic access control lists for comprehensive network management and security.
References:
* Dell Technologies SONiC documentation
* Dell Networking Bundle Configuration Guide


NEW QUESTION # 44
A customer must configure a peer link between two switches in the L2 MC-LAG scenario.
SwitchB has already been configured. Configure the peer link on SwitchA.
Use the following configuration information:
MC-LAG domain 1
VLAN 101
Peer link Port-Channel 100
SwitchA IP: 192.168.1.1/24
SwitchB IP: 192.168.1.2/24
MC-LAG system MAC: 00:00:00:11:11:11
The physical ports to connect the peer switch are Eth 1/5 and Eth 1/6 for each switch.

Answer:

Explanation:
see the explanation for all step by step solution with all explanation.
Explanation:
Here are the steps to configure the peer link on SwitchA:
* Enter Configuration Mode:
SwitchA# configure terminal
* Create VLAN 101:
SwitchA(config)# vlan 101
* Create Port-Channel 100:
SwitchA(config)# interface port-channel 100
SwitchA(config-if-po100)# switchport mode trunk
SwitchA(config-if-po100)# switchport trunk allowed vlan 101
SwitchA(config-if-po100)# exit
* Assign Physical Interfaces to Port-Channel 100:
SwitchA(config)# interface ethernet 1/5
SwitchA(config-if-eth1/5)# channel-group 100 mode active
SwitchA(config-if-eth1/5)# exit
SwitchA(config)# interface ethernet 1/6
SwitchA(config-if-eth1/6)# channel-group 100 mode active
SwitchA(config-if-eth1/6)# exit
* Configure MC-LAG Domain 1:
SwitchA(config)# mclag domain 1
SwitchA(config-mclag-domain)# peer-link port-channel 100
SwitchA(config-mclag-domain)# local-ip 192.168.1.1
SwitchA(config-mclag-domain)# peer-ip 192.168.1.2
SwitchA(config-mclag-domain)# system-mac 00:00:00:11:11:11
SwitchA(config-mclag-domain)# exit
* Save Configuration:
SwitchA# write memory
Comprehensive Detailed Step by Step Explanation with References:
* Enter Configuration Mode:
* Begin by entering the global configuration mode to make changes to the switch configuration.
* Create VLAN 101:
* Create VLAN 101 to be used for the MC-LAG peer link communication.
* Create Port-Channel 100:
* Enter the port channel interface configuration mode using interface port-channel 100.
* Set the port channel to trunk mode with switchport mode trunk.
* Allow VLAN 101 on the trunk with switchport trunk allowed vlan 101.
* Exit the port channel interface configuration mode.
* Assign Physical Interfaces to Port-Channel 100:
* Enter interface configuration mode for ethernet 1/5 and assign it to port channel 100 using the channel-group 100 mode active command.
* Exit the interface configuration mode.
* Repeat the same steps for ethernet 1/6.
* Configure MC-LAG Domain 1:
* Enter the MC-LAG domain configuration mode using mclag domain 1.
* Specify the peer link port channel with peer-link port-channel 100.
* Configure the local IP address as 192.168.1.1 using local-ip 192.168.1.1.
* Configure the peer IP address as 192.168.1.2 using peer-ip 192.168.1.2.
* Set the MC-LAG system MAC address using system-mac 00:00:00:11:11:11.
* Exit the MC-LAG domain configuration mode.
* Save Configuration:
* Save the configuration to ensure the changes persist after a reboot using the write memory command.
References:
* Dell Technologies Networking - SONiC
* Dell Enterprise SONiC Deployment Guide
These steps provide a comprehensive guide to configure the peer link for an MC-LAG scenario on SwitchA, ensuring the specific requirements for IP addressing, VLAN configuration, and port channel setup are met.


NEW QUESTION # 45
Refer to the exhibit.

What is the primary VRRP router for VRRP group 10?

  • A. Router-1
  • B. Router-3
  • C. Router-2

Answer: C

Explanation:
Based on the exhibit, Router-2 has the highest priority (90) in VRRP group 10. In VRRP, the router with the highest priority becomes the primary (master) router. Therefore, Router-2 is the primary VRRP router for VRRP group 10.
References:
* Dell Technologies SONiC VRRP Configuration Guide
* VRRP Protocol Overview


NEW QUESTION # 46
How many ports are in each port-group on the S5200 series switches?

  • A. 0
  • B. 1
  • C. 2

Answer: A

Explanation:
Each port-group on the S5200 series switches consists of 4 ports. This grouping allows for efficient management and configuration of the switch ports in sets.
References:
* Dell S5200 Series Switches Documentation
* Dell Technologies InfoHub


NEW QUESTION # 47
What does show interface breakout port slot/slot command display?

  • A. The Error/Debug status of the breakout of the port
  • B. The configuration of that port
  • C. The In Progress/Complete status of the breakout of the port
  • D. The breakout modes available to that port

Answer: D

Explanation:
The show interface breakout port slot/slot command displays the breakout modes available for the specified port. Breakout modes determine how a single high-speed port can be split into multiple lower-speed ports, providing flexibility in network port configurations.
References:
* Dell Technologies SONiC Command Reference Guide
* Port Breakout Configuration Guide


NEW QUESTION # 48
......

Our D-SNC-DY-00 study question is compiled and verified by the first-rate experts in the industry domestically and they are linked closely with the real exam. Our test bank provides all the questions which may appear in the real exam and all the important information about the exam. You can use the practice test software to test whether you have mastered the D-SNC-DY-00 Test Practice materials and the function of stimulating the exam to be familiar with the real exam's pace. So our D-SNC-DY-00 exam questions are real-exam-based and convenient for the clients to prepare for the D-SNC-DY-00 exam.

Latest D-SNC-DY-00 Test Notes: https://www.braindumpquiz.com/D-SNC-DY-00-exam-material.html

Report this page